STD_PARTS

These symbols are used to make up standard objects (STD_OBJECTS) or panels. They only act as references. Please see the chapter Working with objects for details on how to create custom objects using STD_PARTS.


Symbol	Symbol name	Description
	element_alert	Alarm display (alert color)
	element_clickbox	Box to click on a DPE
	element_clickbox_graphic	Clickbox with a graphic
	element_comment	Displays comment on data point element
	element_default	Displays whether a default value is set.
	element_invalid	Displays whether invalid is set.
	element_off_alert	Displays whether the drive requires maintenance (when operation time expires).
	element_unit	Displays unit for data point element
	element_unit_address	Displays unit if the address is active.
	element_value	Displays value of the data point element.
	element_value_errorframe	Displays frame for error message.
	element_wh_service_type	Displays whether service is required.
	mode_H	Displays manual/automatic horizontal mode.
	mode_V	Displays manual/automatic vertical mode.
	panel_corrvalueselect	Opens correction value panel for editing the data point element
	panel_header_dpcomment	Comment on data point element as panel header
	panel_trendselect	combo box for selecting the trend range and button for displaying the trend display.
	setpoint	Input box; press Enter to confirm. Add an _address config to the data point that is used for the setpoint. The config is necessary to display the setpoint.
	state_text	Displays alert color with related text (for bus)
	state_text_sim	Displays alert color with text and check box for simulating an alarm
	WH_SC1_button	Operation time counter