NTCIP Gateway Debug Flags

This chapter describes possible debug levels for the NTCIP gateway.

NTCIPLoggerFlags

The NTCIPGW Logger Flags define the logging details for the NTCIP communication library. Usually, they can be set to 0, which means no logging/tracing at all. However, during commissioning or testing, it is recommended to use these flags to get some insight into the NTCIP communication process. The flags are representing a bitmap pattern, therefore multiple flags can be activated by just adding the flag values given in the following table. The default setting is 0, which means that by default no flags are activated.

To activate the NTCIPGW Logger Flags the config entry [ntcipgw] NTCIPLoggerFlagsmust be used.

Note: The config file is read only during startup. Any changes in the config file are only available after restarting the NTCIP gateway manager.


Label	Number	Bit	Description
LOG_INIT	2	1	Initialization process
LOG_CONFIG	4	2	Configuration Parameters
LOG_COMMUNICATION	8	3	Communication Details
LOG_COMM_PACKETS	16	4	The communicated data packets in detail
LOG_WORKER	32	5	The worker thread details
LOG_SYSTEM	64	6	The System MIB communication details
LOG_PERFORMANCE	128	7	SNMP call details for NFR checks
LOG_TIMEMGMT	256	8	NTCIP 1201 TimeManagement MIB
LOG_SCHEDULE	512	9	NTCIP 1201 Schedule MIB
LOG_IO	1024	10	NTCIP 1201 IOv2
LOG_VMSCONFIG	4096	12	NTCIP 1203 VMS Configuration
LOG_DEFAULTPARAM	8192	13	NTCIP 1203 Multi Default Parameters
LOG_FONT	16384	14	NTCIP 1203 Font Management
LOG_GRAPHIC	32768	15	NTCIP 1203 Graphic Management
LOG_CONTENT	65536	16	NTCIP 1203 Content Management
LOG_ILLUMINATION	131072	17	NTCIP 1203 Illumination Control
LOG_CONTROL	262144	18	NTCIP 1203 DMS Control
LOG_STATUS	524288	19	NTCIP 1203 DMS Status
LOG_TESTAPP	268.435.456	28	NTCIP Gateway traces
LOG_TOSentryERR	536.870.912 29	29	traces to sentryerr - and to log files
LOG_WITHFLAG	1.073.741.824	30	trace output with flag
LOG_WITHTIME	2.147.483.648	31	trace with timestamp