Pump2 data point type
This data point type can be used to display a controllable pump. There are two different versions to choose from:
-
Type 1: one speed (only the address of .state.on is enabled)
-
Type 2: two speeds (addresses .state.on and .state.on_2 are enabled)
Faults and operating mode messages can be displayed as an option. Please refer to the type table for the command code.
| Element | Data type | Description |
| alert.ControlFuse | bool | Control fuse fault |
| alert.converter | bool | Frequency converter fault |
| alert.flow | bool | Flow indicator fault |
| alert.motorSwitch | bool | Motor protective switch fault |
| alert.motorTherm | bool | Fault in motor thermistor protection |
| alert.overload | bool | Overload fault |
| alert.pressure | bool | Pressure monitor fault |
| alert.runDry | bool | Running dry fault |
| alert.speed | bool | Speed monitoring fault |
| alert.sumalertPLC | bool | External group alert |
| alert.sumalert | string | Internal group alert |
| cmd.on | int | on=1 Off, on=2 On, on= 4 second speed |
| cmd.mode | typref | Reference of the MODE_CMD data type, auto = 2 manual mode, auto = 1 automatic mode |
| para.speed | float | Required speed |
| state.on | bool | On |
| state.on_2 | bool | On 2nd speed |
| state.off | bool | Off |
| state.mode | typref | Reference of the MODE_STATE data point type |
| value.powerCon | float | Power consumption |
| value.speed | float | Speed |
Associated symbols
| Symbol | Symbol name | Description |
|
Compressor | This symbol represents a compressor |
|
Fan | This symbol represents a fan |
|
Macerator | This symbol represents a macerator |
|
Pump | This symbol represents a pump |
