Hi,

Regarding the communication through BACnet protocol does WinCCOA support BACnet/SC. if not what is the type or the concept of security which has been provided in WinCCOA regarding BACnet communication ?

Regards.

We are trying of integrate our WinCCOA OPC A&E Client with other OPC A&E Server (Lenel OnGuard version 7.4) but is not possible complete that integration. OPC A&E Server in the OnGuard is the version 1.0 In the WinCC OA on line help is showed "The OPC A&E client of WinCC OA supp...

In our server we have installed WinCC OA V16, this server is on production now. OPC DA Server seems is damaged. Is there procedure to uninstall only OPC DA Server and reinstall OPC DA Server only without affecting the full installation?

Hello Leo, Thanks for the clarifications. We need only your confirmation that such "BACnet communication" is supported by WinCC OA BACnet Manager, will start our trouble-shooting after your confirmation. in case that WinCC OA doesn't have a clear procedure will try to go with a different c...

Hello Andreas, Thank you for your support. Unfortunately; the configurations in picture above didn't work with the device mentioned. we have tried to connect the device from different network sub-net but the device still offline (Check the attached Wireshark and WinCCOA configurations implemented). ...

Hi Andreas, Sure, please find attached document. As MS/TP network id we considered 103 as MSTP for device gateway; and also we tried to convert the port number "at the end of the MAC address" but it seems to be a very high number which is not allowed to be inserted in BACnet Driver Port/Ma...

Hello Andreas,

Any updates regarding the above case ?

Thanks

Hello Andreas, Please find attached Network Topology and device config, in quick terms (Master Engine (Controller) With MS/TP ID "2001", the MS/TP Devices with MAC Addresses from (1-XX) as Integer Numbers and CRAC Units Gateway. (Under this Gateway MS/TP ID "103" and MAC Address ...

Hello Everyone, I am facing a problem in communicating with BACnet devices over MSTP static routing connection. I am communicating with MSTP loop throw BACnet router which have (2001) network ID. under the router BACnet gateway connected to the same MSTP loop which have different BACnet network ID (...

Hello all I am facing problem in receiving values from field device tag throw BACnet protocol -receiving mode for the present value configured as unsolicited "Change Of Value", archiving configuration "Old/New Comparison " also inserted to the present value to archive all value r...