Supported Platforms of the main Drivers
The following table shows a matrix of the most important WinCC OA drivers / managers and their supported platforms. It has to be taken into account that some drivers on some platforms cannot be realized.
For a specific platform all operating systems are supported which are listed in the chapter Software requirements.
| Driver/Manager | Windows | Linux |
|---|---|---|
| BACnet | ✓ | ✓ |
| DNP3 | ✓ | ✓ |
| Ethernet/IP | ✓ | ✓ |
| IEC 60870 101/104 | ✓ | ✓ |
| IEC 61850 | ✓ | ✓ |
| Modbus/TCP | ✓ | ✓ |
| MQTT | ✓ | ✓ |
| NTCIP Gateway | ✓ | ✓ |
| OPC Alarms & Events | ✓ | ✗ |
| OPC Data Access | ✓ | ✗ |
| OPC Historical Data Access | ✓ | ✗ |
| OPC Unified Architecture | ✓ | ✓ |
| PROFIsafe | ✓ | ✓ |
| RK512 | ✓ | ✓ |
| S7 | ✓ | ✓ |
| S7Plus | ✓ | ✓ |
| S-Bus | ✓ | ✓ |
| Simulator | ✓ | ✓ |
| SINAUT | ✓ | ✓ |
| SNMP | ✓ | ✓ |
| SSI | ✓ | ✓ |
Restriction: PROFISafe and PROFINet are not supported on RedHat
Enterprise Linux and Oracle Linux, but can be used on Debian Linux.
Restriction: Due to technical limitations with openSSL, the OPC
UA driver cannot be used under RedHat Enterprise Linux and Oracle Linux at the
moment..
