Page 1 of 1
Standard Project to Distributed Project
Posted: Wed Aug 09, 2023 10:33 am
by boris_eli
Hello guys,
I want to change the project type from standard to distributed
Is there a way? If so I would appreciate some help
Or I will have to create a new project
thanks a lot
Re: Standard Project to Distributed Project
Posted: Wed Aug 09, 2023 1:20 pm
by hpuchegger
You can change your standard project into a distributed system by adding the relevant entries in your config file, adding a distribution manager, etc. For more specific descriptions please have a look at our documentation:
https://www.winccoa.com/documentation/W ... ms-09.html
Of course, the easier way is to create a distributed system directly.
Br, Herbert
Re: Standard Project to Distributed Project
Posted: Mon Aug 21, 2023 2:38 pm
by boris_eli
hpuchegger wrote: ↑Wed Aug 09, 2023 1:20 pm
You can change your standard project into a distributed system by adding the relevant entries in your config file, adding a distribution manager, etc. For more specific descriptions please have a look at our documentation:
https://www.winccoa.com/documentation/W ... ms-09.html
Of course, the easier way is to create a distributed system directly.
Br, Herbert
thank you for your reply , I tried to insert the commands but it isn't working properly ...
I guess as you said it easier to create distributed system directly .
thanks