Hi,
We required to add 1min alarm delay in email alarm notification email script.
Scenario as below.
If alarm triggered in WinCC OA that time system shall be wait for 1min. later if alarm==1 then only email alert triggered to receipt.
Purpose : We want to avoid unwanted momentary alarms notification to receipts.
Kindly follow attached ctl file. https://www.winccoa.com/fileadmin/image ... /Email.ctl
How to add delay function in active alarms in email.ctl
- kamlakar.raut
- Posts:5
- Joined: Sat Aug 18, 2018 3:34 pm
How to add delay function in active alarms in email.ctl
- Attachments
-
[The extension ctl has been deactivated and can no longer be displayed.]
- Gertjan van Schijndel
- Posts:634
- Joined: Mon Aug 02, 2010 10:37 am
Re: How to add delay function in active alarms in email.ctl
You could use the add-on 'Communication Center' for this.
- kamlakar.raut
- Posts:5
- Joined: Sat Aug 18, 2018 3:34 pm
Re: How to add delay function in active alarms in email.ctl
We are not using "Communication center " for this. We need to add delay function in control script only.
Please advise , how we can add this.
Please advise , how we can add this.
- kamlakar.raut
- Posts:5
- Joined: Sat Aug 18, 2018 3:34 pm
Re: How to add delay function in active alarms in email.ctl
Gertjan van Schijndel wrote:
You could use the add-on 'Communication Center' for this.