My current config entry reads: trendStatusPattern = "userbit10=1" "magenta" "" ""
trendStatusPattern config entry
- aorange
- Posts:147
- Joined: Thu Nov 04, 2010 10:07 am
trendStatusPattern config entry
Is there a way to avoid showing line markers when using this config entry? Every time I try to set the colour of a trend line based on the status of a userbit, the trend automatically displays a marker on each update of my DPE.
My current config entry reads: trendStatusPattern = "userbit10=1" "magenta" "" ""
My current config entry reads: trendStatusPattern = "userbit10=1" "magenta" "" ""
- Attachments
-
- leoknipp
- Posts:2928
- Joined: Tue Aug 24, 2010 7:28 pm
Re: trendStatusPattern config entry
Hello,
at the trendStatusPatterne-entry you have to define the userbit/the attributes for the _online-value-config with an preceding underline "_".
Please modify the settings at your config-file.
Best Regards
Leopold Knipp
Senior Support Specialist
at the trendStatusPatterne-entry you have to define the userbit/the attributes for the _online-value-config with an preceding underline "_".
Please modify the settings at your config-file.
Best Regards
Leopold Knipp
Senior Support Specialist
- aorange
- Posts:147
- Joined: Thu Nov 04, 2010 10:07 am
Re: trendStatusPattern config entry
Sorry that was actually a typo, my config entry reads:
trendStatusPattern = "_userbit10" "magenta" "" ""
trendStatusPattern = "_userbit10" "magenta" "" ""