Hi,
what is the best data point to place alert handler, so I can have an alarm when one of the redundant servers goes offline or the project is stopped?
What is the best data point to place alert handler, so the distributed server can have an alarm when one of the systems is lost?
Best regards,
Vedad
Alert handler for connection to redundant server
- vedadramovic
- Posts:121
- Joined: Mon Apr 07, 2014 10:36 am
Alert handler for connection to redundant server
- leoknipp
- Posts:2928
- Joined: Tue Aug 24, 2010 7:28 pm
Re: Alert handler for connection to redundant server
Hello,
with the System Overview panel you can configure that dist connections shall be taken into accout for the error state calculation. At this panel it is also possible to configure an alert handling for the dist connections.
The information for the connection to the redundant server is written to the dp element _ReduManager(_2).PeerAlive.Link0 (1 = connected).
Best Regards
Leopold Knipp
Senior Support Specialist
with the System Overview panel you can configure that dist connections shall be taken into accout for the error state calculation. At this panel it is also possible to configure an alert handling for the dist connections.
The information for the connection to the redundant server is written to the dp element _ReduManager(_2).PeerAlive.Link0 (1 = connected).
Best Regards
Leopold Knipp
Senior Support Specialist
- vedadramovic
- Posts:121
- Joined: Mon Apr 07, 2014 10:36 am
Re: Alert handler for connection to redundant server
Thank you Leopold very much.