Hello,
Do you have any plans for implementation The Inter Control Center Protocol (ICCP) with the official name TASE.2 in next 3 years? It is specified in the IEC 60870-6 series (namely IEC 60870-6-503 and IEC 60870-6-802), similar to IEC 61850.
Thanks in advance
TASE.2 ICC protocol for WinCC OA
- leoknipp
- Posts:2928
- Joined: Tue Aug 24, 2010 7:28 pm
Re: TASE.2 ICC protocol for WinCC OA
As far as I know at the moment it is not planned to support this protocol.
What is a support of this protocol needed for?
Possibly you can use an OPC server which supports this protocol for the communication with WinCC OA.
Best Regards
Leopold Knipp
Senior Support Specialist
What is a support of this protocol needed for?
Possibly you can use an OPC server which supports this protocol for the communication with WinCC OA.
Best Regards
Leopold Knipp
Senior Support Specialist
- ZEVs
- Posts:16
- Joined: Thu Dec 06, 2012 8:21 pm
Re: TASE.2 ICC protocol for WinCC OA
Hello, Thanks for answer.
It is required for communications between distributed dispatcher centers implemented on different SCADAs and for transferring information to Main Dispatcher center of Country wide or world wide companies.
BR
It is required for communications between distributed dispatcher centers implemented on different SCADAs and for transferring information to Main Dispatcher center of Country wide or world wide companies.
BR