Use of WinCC OA in VMware vSphere cluster solutions

 This FAQ is for information about the advantages and disadvantages about the usage of VMware vSphere clusters with WinCC OA.

There are 5 configuration options:

  1. VMware vSphere vMotion® 
  2. VMware vSphere Storage vMotion
  3. VMware vSphere High Availability (HA)
  4. VMware vSphere Fault Tolerance (FT)
  5. vSphere Storage Appliance (VSA)

____________________________________

  •  WinCC OA is already released for:
    Virtualization on vmWare
  • WinCC OA will be released for:
    Virtualization on vmWare Clusters (without special vSphere options)
  • WinCC OA evaluates the release for:
    vSphere High Availability virtualization on vmWare Clusters
  • WinCC OA will not be released (in near future) for:
    vSphere Fault Tolerant option (Nr. 4)
    vSphere vMotion option (Nr.1)

Note: Due to known issues with the 5th option is this one not supported by WinCC OA.

 

This table shows the advantages and disadvantages of a WinCC OA System in combination with a VMware vSphere cluster.

Functionality WinCC OA
with built in redundancy on dedicated servers
VMware HA
without built in WinCC OA redundancy
WinCC OA
Redundant WinCC OA on vSphere HA cluster
Operability Seamless redundancy switch >15s Seamless redundancy switch
Data loss No data loss >15s No data loss
Connection loss to PLC Seamless redundancy switch >15s Seamless redundancy switch
Failover Supervises the status of both redundant servers and the 
rules for the switchover of the active system can be parameterized 
Cover faults caused by a total failure of a server both advantages available
Geographically distribution Yes Yes Yes
Availability High Availability High Availability High Availability
Setup and reinstallation of a destroyed server hardware ~4hours ~minutes ~minutes
Performance High Performance Performance degraded due to virtualization Performance degraded due to virtualization
Configuration High effort Lower effort Lower effort
Online Version Upgrade WinCC OA can be updated in split mode during system operation Offline update WinCC OA can be updated in split mode during system operation
IEC 61508 (SIL) certification Up to SIL 3 for use on non virtualized platforms Not available Not available

 

For detailed information have a look to our Use of WinCC Open Architecture in VMware vSphere cluster solutions presentation

Date added:
Last revised:
Hits:
8.708
Rating:
Rating: 3.6. 43 vote(s).
43 anonymous votes
No rating done at all.
Your vote was '' (0 of 5) You are an anonymous user.
You may log on to do personalized votings
Click the rating bar to rate this item Please log on to do ratings
  • Notification

    FE user cannot be identified! (1403201096)