How to simulate connection via IEC 101 driver without any hardware and if just one COM port will be provided by the host

To be able to simulate a connection via COM port you can download and install com0com software (= Null-modem emulator), which creates pairs of virtual COM ports.

The output to one port is the input from other port and vice versa.

Afterwards hyper terminal can be used for both new virtual COM ports to check functionality above.

Now, two WCCOA IEC drivers can be used to simulate connection, one driver defined as master.<o:p></o:p>

Date added:
Last revised:
Hits:
4.306
Rating:
Rating: 0.0. 0 vote(s). No rating done at all.
Your vote was '' (0 of 5) You are an anonymous user.
You may log on to do personalized votings
 Click the rating bar to rate this item Please log on to do ratings

  • Notification

    FE user cannot be identified! (1403201096)

  • Information

    Not already rated (1403203414)

Tags:
Engineering
 go back