Profisafe Communication Between 400-H PLC and WinCC OA 3.16

Find and share HowTos to various installations / configurations!
Search

Post Reply
4 posts • Page 1 of 1
Kalai123
Posts: 12
Joined: Wed Jun 27, 2018 8:16 am

Profisafe Communication Between 400-H PLC and WinCC OA 3.16

Post by Kalai123 » Wed Aug 07, 2019 9:21 am

Hi,

Anyone can give an example program/ procedure to get Profisafe communication between 400-H PLC and WinCC OA 3.16?.

Thanks in advance!

gschijndel
Posts: 86
Joined: Tue Jan 15, 2019 2:12 pm

Re: Profisafe Communication Between 400-H PLC and WinCC OA 3.16

Post by gschijndel » Fri Aug 16, 2019 9:59 am

I do not have an example. But if there is something unclear from the documentation or you have a specific question, we might be able to help you.

Kalai123
Posts: 12
Joined: Wed Jun 27, 2018 8:16 am

Re: Profisafe Communication Between 400-H PLC and WinCC OA 3.16

Post by Kalai123 » Tue Aug 27, 2019 9:56 am

Thanks for your reply.

Though I followed the steps which are mentioned in the WinCC OA Help file for Profisafe communication in TIA, I have faced some errors while configuring.

Please find the attached file, which has the comparison of WinCC OA Help file and Real Scenario in TIA.

Kindly go through it and let me know the solution.

Thanks in advance!
Attachments
Comparison of TIA configuration help in WinCC OA and Real Scenario.xlsx
(1.6 MiB) Downloaded 38 times

kumar.samarth@tcs.com
Posts: 3
Joined: Wed Jul 10, 2019 4:45 am

Profisafe Communication Between 4175-H PLC and WinCC OA 3.16

Post by kumar.samarth@tcs.com » Fri Sep 13, 2019 8:41 am

Hi,

We have a requirement to establish and test communication of S7 417-5H CPU (redundant configuration) with WinCC-OA V3.16 over profisafe comms.

If there is any implemented or tested reference program or manual for configuring safety communication between S7 417-5H and WinCC-OA available then kindly share.

Also, I have already tried to configure communication following the steps which are mentioned in the WinCC OA Help file for Profisafe communication in TIA and observed some errors. Please find the attached file, which has the comparison of WinCC-OA Help file and Real Scenario in TIA.

If any solution is available kindly share it on proirity.

Thanks in advance
Attachments
Comparison of TIA configuration help in WinCC OA and Real Scenario.xlsx
(1.6 MiB) Downloaded 9 times

Post Reply
4 posts • Page 1 of 1