Search found 2634 matches

Search

by leoknipp
Fri Jan 14, 2022 11:01 am
Forum: Bugs / Problems
Topic: Calendar 'Clicked' script
Replies: 1
Views: 125

Re: Calendar 'Clicked' script

I have compared 3.11 and 3.18 and the displayed scripts in GEDI are the same.
In the "Extended" tab I can see the option to edit a "clicked" script.

Best Regards
Leopold Knipp
Senior Support Specialist
by leoknipp
Wed Jan 12, 2022 8:28 am
Forum: HowTos
Topic: Upgrade PVSS v3.1 to WinCC OA v3.18
Replies: 3
Views: 482

Re: Upgrade PVSS v3.1 to WinCC OA v3.18

Information for the WinCC OA Support you can find at the following page: https://www.winccoa.com/support.html Please take into account that you need a valid support contract if you want to get in contact with the WinCC OA support team. For details concerning your contract please get in contact with ...
by leoknipp
Mon Jan 03, 2022 9:29 am
Forum: HowTos
Topic: dpQuery() _address.._type
Replies: 8
Views: 789

Re: dpQuery() _address.._type

The Event Manager does not have any information for the driver related configs. Therefore you cannot use any of the attributes in a query. Doing a TIMERANGE query to get the elements which have an archive config is not a good option as you will get only results for those elements where values are sa...
by leoknipp
Mon Jan 03, 2022 9:25 am
Forum: Bugs / Problems
Topic: 3.14 - When will this log occur?
Replies: 2
Views: 240

Re: 3.14 - When will this log occur?

The log message "Blocking manager" is written by the process monitor if the heartbeat counter in the shared memory of the WCCILpmon was not updated within the given timeout. The manager WCCOAeesSnd is not part of the WinCC OA installation. It is a customer specific process. If you want to ...
by leoknipp
Thu Dec 30, 2021 10:11 am
Forum: Bugs / Problems
Topic: Connecting with S7 driver
Replies: 3
Views: 625

Re: Connecting with S7 driver

According to the documentation the S7 and the S7PLus driver can be used to establish a connection to an S7-1500 device. There need to be done some specific configuration in the PLC/TIA Portal for the connection. If this specific CPU can be connected I cannot answer. For details please have a look at...
by leoknipp
Thu Dec 30, 2021 9:58 am
Forum: HowTos
Topic: Get module xy-coordinates?
Replies: 5
Views: 449

Re: Get module xy-coordinates?

It looks like there is no function available to get the current position of the modules. When opening a new module you can define where it shall be opened. If the value "-2" is used for the x/y position the last position saved in PVSS00ui.ini is used. For details please have a look at the ...
by leoknipp
Thu Dec 30, 2021 9:33 am
Forum: HowTos
Topic: dpQuery() _address.._type
Replies: 8
Views: 789

Re: dpQuery() _address.._type

If you want to get only those elements with an active _address config an easier solution is possible using the _DriverCommon datapoints. You can have a look at a sample panel to see how it works: https://www.winccoa.com/downloads/detail/io-counter.html?tx_mddownloads_mddownloadsfe%5BoverwriteDemand%...
by leoknipp
Tue Dec 28, 2021 4:46 pm
Forum: HowTos
Topic: dpQuery() _address.._type
Replies: 8
Views: 789

Re: dpQuery() _address.._type

I am not sure what the "traditional" method is.
Which information do you want to read?
How do you read the information?

Best Regards
Leopold Knipp
Senior Support Specialist
by leoknipp
Tue Dec 28, 2021 8:55 am
Forum: HowTos
Topic: How to find out when the project was launched
Replies: 10
Views: 1132

Re: How to find out when the project was launched

You can read the information from the process monitor. For details please have a look at the documentation: https://www.winccoa.com/documentation/WinCCOA/3.18/en_US/Pmon_Consolepanel/Pmon_Consolepanel-06.html Another possibility is to read the information from the _Connections datapoint and its elem...
by leoknipp
Tue Dec 28, 2021 8:51 am
Forum: HowTos
Topic: dpQuery() _address.._type
Replies: 8
Views: 789

Re: dpQuery() _address.._type

Doing a dpQuery() to get information for the _address config is not possible. With the dpQuery() command only information can be read which is saved in memory of the Event Manager. All driver related configs (_address, _cmd_conv, _msg_conv, _smooth) are only saved in memory of the driver and cannot ...