Unfortunately. we are using 3.15 and keep getting 'Conversion failed'. (We do see that we are receiving the right message '[len=8 itemSize=8 subindex=0]' )
We will try to download the latest patch for 3.15 and will then re-test and let you know
share the fun
Frenk Mulder
How to read a datetime from a 1500 PLC through OPC UA
- fmulder
- Posts:330
- Joined: Wed Feb 03, 2010 9:46 am
Re: How to read a datetime from a 1500 PLC through OPC UA
- fmulder
- Posts:330
- Joined: Wed Feb 03, 2010 9:46 am
Re: How to read a datetime from a 1500 PLC through OPC UA
We just downloaded and installed 3.15P12. We then used the LDT in our 1500 PLC !
Good news : we're now correctly reading the timestamp from the PLC natively. No scripting required.
Mousser and Gertjan : Thanks a lot for your help
share the fun
Frenk Mulder
Good news : we're now correctly reading the timestamp from the PLC natively. No scripting required.
Mousser and Gertjan : Thanks a lot for your help
share the fun
Frenk Mulder